Strength guarantee

Strength guarantee

Quality assurance

Quality assurance

Delivery guarantee

Delivery guarantee

After-sales protection

After-sales protection

ABOUT US

A modern enterprise integrating R&D, production and sales of impact breakers and compactors

Zibo Xuyang Industry and Trade Co., Ltd.

Zibo Xuyang Industry and Trade Co., Ltd. became a modern enterprise integrating R&D, production and sales of impact breaker and compactor products in 2004. It is located in Linzi, the ancient capital of Qi State. In 2016, we developed "Delaikeri" brand products, and after years of hard work, we have won the trust and support of new and old customers.

  • 2004

    Founded in 2004

  • 50

    +

    Existing employees

  • 16

    +

    Industry production experience

PRODUCTS

A modern enterprise integrating R&D, production and sales of impact breakers and compactors

imgboxbg

The impact principle is the falling assist air push type, which can be used for oblique and straight hitting.

imgboxbg

High fill and thick fill are compacted as a whole to improve productivity, and can strengthen river dams

NEWS

A modern enterprise integrating R&D, production and sales of impact breakers and compactors

How to disassemble the breaker correctly

When the excavation operation and the crushing operation are performed alternately, the breaker can be easily loaded and unloaded by loading and unloading the hydraulic hose and two bolts. However, due to the possibility of contaminating the hydraulic oil, we have to follow the standard steps for disassembly, let's take a look below. 1. Move the construction machinery to a flat and open place and be careful not to have moisture, sludge, dust and other substances that easily pollute the hydraulic oil. Turn off the engine and pay attention to release the pressure first when the hydraulic cylinder is pressurized. 2. Rotate the shut-off valve installed at the end of the machine body by 90° to prevent the hydraulic oil from flowing out. 3. Remove the hose joints on the construction machinery, recover the outflowing hydraulic oil, and put it back into the hydraulic oil tank. 4. Take care to avoid letting dust and sludge enter the hydraulic pipeline. Please close the hose and pipeline with a hose plug and an integrated cover to keep the oil system clean. And fix the high and low pressure hoses to avoid contamination. 5. When you want to remove the breaker, first pull out the two pins connecting the breaker and the boom. When working outdoors, place the breaker on a wooden block to isolate it from the ground and cover it on the outside.
2020-09-17

How to park the rammer

Tamping machines are widely used in highway compaction work. Because the construction process is relatively large and the quantity required is large, how to park the tamping machines? Today, the editor of Tai'an Hengda Machinery Co., Ltd. will introduce to you: 1. The parking of the mechanical equipment during the construction operation of the rammer should be unified. Choose a flat, spacious, and safe place to ensure the safety of the mechanical equipment during the parking process. 2. If the mechanical equipment is not in use and needs to be parked for a long time, the mechanical equipment operator shall maintain the mechanical equipment before parking the mechanical equipment and park the mechanical equipment in the garage; 3. If there is no garage, the equipment should be covered and parked in a dedicated warehouse. Fourth, the equipment parking place should be fireproof, waterproof and lightning-proof.
2020-09-17

2022 crusher hammer head, crusher replacement hammer head

The hammer crusher is often used in the sand and gravel production, 2022 crusher hammer, cement, clinker crushing, and coking plants. In the configuration, the hammer of the crusher is the main wear component. Current market: City "The hammer heads of the crusher sold are mostly made of high-manganese steel. After the high-manganese steel is punished by water toughness, the hardness will increase. It has the main advantage, in the context of greater pressure and offensive power. The skin phase of the components will become thinner, and this feature makes the components obtain excellent wear resistance. However, when it is breaking and cracking coal-like materials, the hardness of coal: is very low, so that the hardening of high manganese steel cannot be fully explained, so it will not! Explain the wear resistance of the parts, reversible hammer type The crushing machine is easy to wear like materials with low hardness, which leads to the service life and life deletion of the crusher's hammer, which greatly reduces the operating speed of the configuration and adds to the loss of labor. At this time, it is necessary to select high-chromium alloy hammers.
2020-09-17

Factors affecting the frequency of hammer blows

The breaker uses the hydraulic system to promote the reciprocating movement of the piston to perform work and output striking energy to perform work. The common striking frequency errors of the breaker include no strike, intermittent strike, low strike frequency, and weak strike. So, what are the reasons for these phenomena? Let the breaker manufacturers take you to explore today: 1. The piston moves but does not strike. The main reason for this situation is that the drill rod is stuck. The drill rod can be removed to check whether the drill rod pin and the drill rod are broken or damaged. If necessary, observe whether the piston in the inner jacket is broken and the small piece of the drill rod is stuck. Otherwise, clean up in time. 2. There is not enough high-pressure oil to flow into the hammer without hitting: there is not enough high-pressure oil to flow into the hammer without hitting. 3. Piston stuck: Whether the piston is flexible by pushing and pulling by hand, if the piston cannot move flexibly, the piston and the guide sleeve have been scratched, the guide sleeve should be replaced, and the piston should be replaced if possible. 4. It cannot be hit when it is crushed, but it can be hit when it is lifted up a little: This situation may be caused by the wear of the inner sleeve, which needs to be checked and replaced. 5. Improper replacement of the bushing. After replacing the bushing, the breaker failed to stop working. It would not strike when pressed down, and would strike after being slightly lifted. After replacing the bushing, the piston position must be higher, causing some small reversing valve control oil passages in the cylinder to be closed at the initial position, and the reversing valve stops working and the breaker stops working. Need to adjust and replace the original or regular bushing.
2020-09-17

Choosing the "Delaikeri" brand to create a better future!

CONTACT US

Zibo Xuyang Industry and Trade Co., Ltd.
Mobile: 
13561625222 (Mr Zheng)

Phone: 0533-7600178
E-mail: 396098324@qq.com

Address: Dongzhao West Village, Phoenix Town, Linzi, Shandong

Zibo Xuyang Industry and Trade Co., Ltd.

Contact us by Wechat

Copyright ©  2020  Zibo Xuyang Industry and Trade Co., Ltd.  All rights reserved  鲁ICP备2020039575号